Home Cinema Installations and Noise Transmission Through Doors

The reference level of a soundtrack is 105db and 115db for the LFE channel. Most people would find these levels quite high, but not tough listen to, in a correctly designed home cinema room.

A problem occurs though, when we face the challenge of keeping the noise inside the cinema room. In home installation, quite often we find bedrooms and other living areas to be right next to the Home Cinema Installation St Albans cinema nursery. Special room construction techniques allow us produce a sufficient noise barrier, in order to reduce any sound transmission towards the adjacent rooms.

However, doors have always been the weakest point, in this attempt. The mass, damping and stiffness of the home cinema door will determine its resistance towards the passage of any sound waves. A door’s ability to relieve noise is written by its Sound transmission Class. This means, the higher inside Class the better the efficiency.

One more problem arises though; Sound waves can travel through any opening with very little loss. And to top it off, a tiny hole in a barrier would transmit nearly as much sound being a much larger emergency. This acoustic property of sound could be an oversized problem in a building cinema installation, where high quality construction is required. Can be where acoustical gaskets come into engage. A home cinema door, in an effort to be effective, the seals around the head, jamb and sill must be complete and air-tight.

In other words, the standard of of the acoustical gasket in an at home cinema installation, would see how close the particular sound performance of the door, arrives to the published order. A hi-end home cinema design should take all the info into consideration, to ensure a hi-end acoustical end result.